JL Audio C3-570
$499.99
Local Pickup Only
-
5×7 / 6×8-inch Convertible Component/Coaxial Speaker System
Description
The C3 line of speaker systems from JL Audio give you the option to mount the tweeter and woofer separately or to mount the two in a coaxial configuration without sacrificing audio quality. This gives you the flexibility to adapt the speaker system to your individual needs when installing.
It’s a common misconception that oval shaped speakers don’t perform as well as their round counterparts, but in this case, nothing could be further from the truth. JL has engineered these speakers in such a way that provides a listening experience equivalent to that of their 6.5-inch round speaker systems.
The C3-570 speaker system features 5×7/6×8-inch component woofers and 1-inch silk dome diaphragms that provide a rich listening experience that will immerse you in your tunes and can be tuned perfectly to your vehicles layout.
C3 crossover networks are compact and built with premium component parts, including Mylarยฎ capacitors and segmented air-core inductors. Four levels of tweeter attenuation are provided, as well as three levels of mid-range presence adjustment, for twelve possible voicing combinations!
Woofer grilles are not available for this product.
Sold as a pair.
Specifications:
General Specifications:
| Continuous Power Handling (RMS) | 75 W |
| Recommended Amplifier Power (RMS) | 25 – 150 W / Ch. |
| System Efficiency | 90.0 dB @ 1 W / 1 m |
| System Nominal Impedance | 4 ฮฉ |
| System Frequency Response | 48 Hz – 25 KHz ยฑ 3 dB |
Woofer Physical Specifications:
| Frame Outer Diameter* (A) | 5.52 x 7.68 in / 140 x 195 mm |
| Grille Tray Outer Diameter (B) | N/A |
| Motor Outer Diameter (C) | 4.08 in / 104 mm |
| Frontal Coaxial Tweeter Protrusion** (D) | 0.78 in / 20 mm |
| Frontal Grille Protrusion (E) | N/A |
| Mounting Hole Diameter (F) | N/A |
| Mounting Depth (G) | 2.52 in / 64 mm |
| *Does not take into account mounting tabs **Frontal coaxial tweeter protrusion measured from mounting surface |
|
Tweeter Physical Specifications:
| Flush Mount Fixture Diameter (A1) | 2.12 in / 54 mm |
| Surface Mount Fixture Diameter (A2) | 1.93 in / 49 mm |
| Flush Mount Mounting Hole Diameter (B) | 1.875 in / 48 mm |
| Flush Mount Fixture Mounting Depth (C) | 0.71 in / 18 mm |
| Flush Mount Tweeter Frontal Protrusion (D1) | 0.32 in / 8 mm |
| Surface Mount Tweeter Frontal Protrusion (D2) | 0.95 in / 24 mm |
Crossover Physical Specifications:
