JL Audio RD1000/1
$599.99
Local Pickup Only
-
Mono subwoofer amplifier — 1,000 watts RMS x 1 at 2 ohms
Description
The RD1000/1 from JL Audio is designed specifically with high-power subwoofers in mind, providing a whopping 1000 W of power and loaded with features, this amp provides everything you need to have a next-level bass experience.
Plenty of Power.
The JL Audio can deliver an impressive 1000 W of output into 2 ohms (14.4V, 1% THD) or 600W at 4 ohms giving you rich, thundering bass that can be heard over the noise of the road. And thanks to JL Audio’s proprietary NexD™ Technology, all of that power is delivered in a way that is highly-efficient and minimizes distortion, giving you the best listening experience without taxing your vehicle’s electrical system too much.
Superior Sound Control
JL has taken the hassle out of fine tuning your audio experience by placing all of the audio controls at the very top of the amplifier underneath a convenient protective cover. This amp also features a 12 dB / octave low-pass filter, with continuous variable frequency selection fro 50-500 Hz, as well as a variable bass boost EQ. Automatic turn-on capacity (via signal sensing or DC-offset sending) is standard, along with a set of preamp outputs so signals can be passed to another amp with ease.
Quality and Design
JL builds it’s products out of durable materials, and the RD15000/1 is absolutely no exception. This amp features a black powder-coated finish, accented by an LED light strip that runs across the body and doubles as a status/condition indicator.
Features:
- mono subwoofer amplifier
- 600 watts RMS x 1 at 4 ohms (1000 watts RMS x 1 at 2 ohms)
- Class D amplifier design with NextD™ switching amp technology
- differential-balanced inputs help eliminate noise
- variable low-pass filter (50-500 Hz, 12 dB/octave)
- variable bass boost (0-12 dB at 45 Hz)
- LED clip light helps set gain
- blue LED accent lighting
- optional wired remote level control
- preamp inputs and outputs
- speaker-level inputs (speaker wire to RCA adapter required)
- 4-gauge power and ground leads and a 80-amp fuse recommended — wiring and hardware not included with amplifier
- no onboard fuses — when installing multiple amps in a system, an additional 80-amp in-line fuse between the distribution block and the amplifier is recommended
- 14-5/8″W x 2-3/16″H x 7″D
What’s in the Box:
- Mono bloc amplifier
- JL Audio badge
- 2.5mm Allen wrench
- Owner’s Manual
Specifications:
| @ 4 Ω | 600 W RMS x 1 |
| @ 3 Ω | 800 W RMS x 1 |
| @ 2 Ω | 1000 W RMS x 1 |
| @ 1.5 Ω | N/A |
| @ 4 Ω | 500 W RMS x 1 |
| @ 3 Ω | 650 W RMS x 1 |
| @ 2 Ω | 800 W RMS x 1 |
| @ 1.5 Ω | N/A |
| Frequency Response | 7 Hz – 500 Hz (+0, -1dB) |
| S/N Ratio, referred to highest rated power | >80 dB below rated power (A-weighted, 20 Hz – 20 kHz noise bandwidth) |
| S/N Ratio, referred to 1 W | >50 dB (A-weighted, 20 Hz – 20 kHz noise bandwidth) |
| Damping Factor @ 4 Ω | >1000 / 50 Hz |
| Damping Factor @ 2 Ω | >500 / 50 Hz |
| THD+N @ Rated Power | <1% @ 2 Ω per Ch. |
| Input Voltage Range @ RCA Inputs | Switchable from 200 mV – 2 V RMS (Low) to 800 mV – 8 V RMS (High) |
| Min.Copper Power / Ground Wire Gauge | 4 AWG wire |
| Fuse Rating | 80 A (AFS, AGU or MaxiFuse™) |
| Filter Mode(s) | Low-Pass only |
| Filter Slope(s) | 12 dB/octave |
| Filter Frequency Range | 50 Hz – 500 Hz |
| Detented, Calibrated Filter Freq. Potentiometer | No |
| Filter Defeat Function | No |
| Infrasonic Filter | No |
| Bass Boost EQ | Yes |
| Output Polarity Switch | No |
| Remote Subwoofer Level Control | Optional (RBC-1) |
| Remote Bass EQ Boost Control | No |
| Pass-Through Preamp Output | Buffered |
Physical Specs:
| Height (H) | 2.13 in / 54 mm |
| Width (W) | 14.66 in / 372 mm |
| Depth (D) | 6.96 in / 177 mm |
