Rockford Fosgate Power T750X1bd

$499.99

-

Compact mono subwoofer amplifier โ€” 750 watts RMS x 1 at 1 to 2 ohms

Out of stock

SKU: T750X1bd Categories: , , Brand:

Description

Super-compact, bursting with power

Rockford Fosgateโ€™s Power Series T750X1bd mono amplifier can drive up to 750 watts RMS into a 1-ohm load, allowing you to power multiple subs for bigger and better bass. A dual-fan forced air cooling system keeps this sturdy little amp from overheating, so it can play hard for a long time.

Rockford Fosgateโ€™s high-tech solutions yield more power

This Power Series amplifier actively monitors speaker or sub performance using Rockford Fosgateโ€™s Constant Power technology. A subwooferโ€™s impedance naturally fluctuates as it performs. So, just like your cruise control increases the engineโ€™s RPM to maintain your carโ€™s speed uphill, Constant Power maintains this ampโ€™s output by increasing its internal voltage and current when the subโ€™s impedance rises. This results in up to a 25% increase in the ampโ€™s total power output, especially in the crucial range below 50 Hz where a sub amp really has to shine.

Easy to set for optimum performance

Rockford Fosgateโ€™s C.L.E.A.N. technology (Calibrated Level Eliminates Audible Noise) setup system ensures your music will sound as clean and powerful as possible. It works like this: play the setup tone on the included test CD, adjust the receiver volume until a red clip light on the amp goes out, then turn the amp gain up until a blue light comes on. Itโ€™s that simple โ€” your amplifier will be perfectly set to match your receiverโ€™s output. When your receiver reaches maximum clean volume, youโ€™ll get maximum clean power from your power amp. At quiet listening levels, youโ€™ll hear less background noise and more of your music.

Clip lights monitor distortion

If that blue light turns solid red while youโ€™re playing music, the ampโ€™s telling you that your source is distorting and you should turn it down, or risk damage to your gear. The optional PLC2 remote level control also doubles as a clip indicator, so you can see from the front seat if your musicโ€™s clipping and restore pristine sound.

Product highlights:

  • mono subwoofer amplifier
  • 500 watts RMS x 1 at 4 ohms (750 watts RMS x 1 at 2 ohms)
  • 750 watts RMS x 1 at 1 ohm
  • CEA-2006 compliant
Features:
  • Class BD amplifier technology with Constant Power topology
  • C.L.E.A.N. gain setup system includes clip lights and test tone CD
  • differential input circuitry helps eliminate hum
  • dual-fan forced induction cooling
  • variable low-pass filter (50-250 Hz, 12 dB/octave)
  • switchable subsonic filter (28 Hz, 12 dB/octave)
  • variable Punch EQ (0-18 dB at 45 Hz)
  • optional PLC2 Punch Level Control wired remote with clip light available
More Info:
  • preamp and speaker-level inputs
  • signal-sensing turn-on with speaker-level input eliminates the need for remote turn-on lead
  • 8-gauge power and ground leads and a 100-amp fuse recommended โ€” wiring and hardware not included with amplifier
  • no onboard fuses โ€” when installing multiple amps in a system, an additional 100-amp in-line fuse between the distribution block and the amplifier is recommended
  • 8-1/2โ€ณW x 1-11/16โ€ณH x 4-5/16โ€ณD

Whatโ€™s in the box:

  • Mono amplifier
  • 14โ€ณ Input harness (4-pin Molex connector to 2 female RCAs)
  • Removable power/ground/remote turn-on plug (installed)
  • Removable speaker output plug (installed)
  • Setup disc CD-ROM
  • Amplifier Quick Setup sheet
  • Certificate of Performance Verification