Rockford Fosgate Power T750X1bd

$499.99

-

Compact mono subwoofer amplifier — 750 watts RMS x 1 at 1 to 2 ohms

Out of stock

SKU: T750X1bd Categories: , , Brand:

Description

Super-compact, bursting with power

Rockford Fosgate’s Power Series T750X1bd mono amplifier can drive up to 750 watts RMS into a 1-ohm load, allowing you to power multiple subs for bigger and better bass. A dual-fan forced air cooling system keeps this sturdy little amp from overheating, so it can play hard for a long time.

Rockford Fosgate’s high-tech solutions yield more power

This Power Series amplifier actively monitors speaker or sub performance using Rockford Fosgate’s Constant Power technology. A subwoofer’s impedance naturally fluctuates as it performs. So, just like your cruise control increases the engine’s RPM to maintain your car’s speed uphill, Constant Power maintains this amp’s output by increasing its internal voltage and current when the sub’s impedance rises. This results in up to a 25% increase in the amp’s total power output, especially in the crucial range below 50 Hz where a sub amp really has to shine.

Easy to set for optimum performance

Rockford Fosgate’s C.L.E.A.N. technology (Calibrated Level Eliminates Audible Noise) setup system ensures your music will sound as clean and powerful as possible. It works like this: play the setup tone on the included test CD, adjust the receiver volume until a red clip light on the amp goes out, then turn the amp gain up until a blue light comes on. It’s that simple — your amplifier will be perfectly set to match your receiver’s output. When your receiver reaches maximum clean volume, you’ll get maximum clean power from your power amp. At quiet listening levels, you’ll hear less background noise and more of your music.

Clip lights monitor distortion

If that blue light turns solid red while you’re playing music, the amp’s telling you that your source is distorting and you should turn it down, or risk damage to your gear. The optional PLC2 remote level control also doubles as a clip indicator, so you can see from the front seat if your music’s clipping and restore pristine sound.

Product highlights:

  • mono subwoofer amplifier
  • 500 watts RMS x 1 at 4 ohms (750 watts RMS x 1 at 2 ohms)
  • 750 watts RMS x 1 at 1 ohm
  • CEA-2006 compliant
Features:
  • Class BD amplifier technology with Constant Power topology
  • C.L.E.A.N. gain setup system includes clip lights and test tone CD
  • differential input circuitry helps eliminate hum
  • dual-fan forced induction cooling
  • variable low-pass filter (50-250 Hz, 12 dB/octave)
  • switchable subsonic filter (28 Hz, 12 dB/octave)
  • variable Punch EQ (0-18 dB at 45 Hz)
  • optional PLC2 Punch Level Control wired remote with clip light available
More Info:
  • preamp and speaker-level inputs
  • signal-sensing turn-on with speaker-level input eliminates the need for remote turn-on lead
  • 8-gauge power and ground leads and a 100-amp fuse recommended — wiring and hardware not included with amplifier
  • no onboard fuses — when installing multiple amps in a system, an additional 100-amp in-line fuse between the distribution block and the amplifier is recommended
  • 8-1/2″W x 1-11/16″H x 4-5/16″D

What’s in the box:

  • Mono amplifier
  • 14″ Input harness (4-pin Molex connector to 2 female RCAs)
  • Removable power/ground/remote turn-on plug (installed)
  • Removable speaker output plug (installed)
  • Setup disc CD-ROM
  • Amplifier Quick Setup sheet
  • Certificate of Performance Verification